When selecting the filament that’s loaded in the AMS, I cannot select one of the new filament presets I created. I can only see the system presets. How can I choose the presets that I made? Because I want to print Meta PLA which has a minimum temperature of 180° so I have made a preset with a lower…

This is wild, are we being punished for using custom filaments? The wish list of basic functionality here is: Define custom filament information in one place, for use in slicer and AMS selection AMS selection of custom filament should be simple, persist, and reflect in slicer Ideally AMS selectio…

I have discovered that Resync will always repopulate to what was set at the printer. You cannot change the filament type and/or color in the app nor the PC and have that flow to the printer. To set up the custom filaments, you need to use your pc (perhaps app or printer…have not figured how to do t…

This is however horribly inconvenient. Every time you hit “resync” it will just reset all my custom profiles to the “Generic PLA” from the AMS settings. I’d much rather have AMS settings unified with slicer settings or at least the feature to create AMS profiles, so I can select my own “Sunlu PLA” …

How does this work if you have a K factor from doing the calibration. I cannot see anywhere it uses that except the AMS. I don’t know why that doesn’t seem to be in the filament profile in the slicer. I would think it would be. If it its then I haven’t found it.

Is there any solution to this? I finally decided to create custom calibration profiles for my filaments, but I can’t for the life of me figure out how to select the filament in the AMS filament selector. Why is managing filament profiles so confusing??? :frowning_face:

see: [image] Custom Filaments not syncing to AMS Bambu Lab Software try rebinding your printer: worked for me!

I’m in the same situation. How do I load custom filaments onto the printer, so that when I load a spool of filament into the AMS, I can then select that custom filament from the printer’s touchscreen?

I’m in this boat as well. I have a custom filament that I’ve tuned. But getting it to load using the AMS is impossible. Working with filament database between the AMS and the slicer is unbelievable.

/Any sign of this getting fixed anytime soon? Just seems mad to have the ability to create custom filaments and not able to assign them to the AMS

I absolutely agree. I get the feeling it’s not important for them to support non-Bambu filament.

Selecting custom filaments in the AMS

Bambu Lab Software Bambu Studio

3DTom April 30, 2024, 7:27pm 40

see: