Strange movement when sewing

Bambu Lab P1 Series
1

Hello

I am trying to parameterize a generic PA, but I am having problems with the sewing of the objects.

When it reaches the end of the layer path, the nozzle leaves the part and makes an arc movement, leaving a large amount of material stuck.

I have tried with different parameters in Bambu Studio 1.6.2.4 and after more than twelve tests I still get the same results.

I am working on the Generic PA profile and I have also tried other profiles that I have seen on the internet, but I always have the same result.

Any idea why it does this?

Thank you

IMG_20230626_105419
IMG_20230626_1054191920×1081 78.7 KB

IMG_20230626_105514
IMG_20230626_1055141920×1081 63.6 KB

2

and with what tests you try to dial in the filament? the calibrations tests in orca slicer are quite good to get a workflow with new filament…temp…flow…PA…im not a big fan of the calibration cube

3

I do the tests to parameterize the filament. The piece didn’t matter to me. I chose that piece out of habit.

After numerous tests, I realize that the volumetric speed that BambuLab Studio and OrcaSlicer brings by default is too high for such high temperatures.