Tomās hardware says theyāll compare it to the X1C, not the X1E. Wonder if thatās just because itās what they have or if this isnāt going to be X1E pricing after all
4 Likes
We still havnt seen or heard anything about a chamber heater or connectivity. Could be why. Maybe we will also see an H2DE
You knowā¦ Youāre right. Iām kinda expecting a heated chamber, if it doesnāt have it thatās a bummer
1 Like
It would be awesome!
I am teetering on not likely due to the motion system would have to extend beyond the bed to allow for the extruders to reach the same part of the print bed and with the P1S and X1C that would not be possible in my eyes as the print head doesnāt move far enough as it is now to get further off the bed to allow for a 2nd extruder to touch the plate in the same spot if you were to print the full size of the bed. This new printer most likely has a bit more room for the motion system to move which is why the bed size is not 300x300 to maintain a moderately sized printer.
None of you guys got it right. Isnāt it obvious? When my brain unfolds this Rorschach test, itās clear to me that the upper left is a picture of a pickle drowning to death in a bowl of molten ice cream, and the bottom right is clearly a vision of hot dogs chasing donuts through the Holland Tunnel. Donāt you all see that? 
5 Likes
Greatings, I am so excited, I believe this model is also capable of printing the metal alloy filaments, also If The price range is around 3k usd. The brand will expand the market share taken from the Ultimaker and Snap maker by convincing the users.
I wonder a few more things:
1.Letās see how many more patent issues they will have with Stratasys after the printer relasease.
2.I am curious how long after creality and other competitives will copy the design to steal customers 
Finally patience game is over!!
After looking more at the one on the bottom right I think itās a robotic hand slowly reaching for my wallet.
10 Likes
Iām thinking itās the power supply for some type of Marital Aidā¦ or it could just be a yellow piece of plastic. Either/or works for me. 
2 Likes
Now that would be an interesting feature.
1 Like
I donāt think itāll be IDEX.
1 Like
No, like a map of print farms where people can add their farm and other people can commission them to print stuff.
If it does not have a heating chamber, can i even print PA6-CF? Should work for small parts, right? No teaser picture has a hint to a heating chamber.
So the price for the X1C is about 1400ā¬ without discount and ams. If that is what Bambu labs ment with āabove the X1 seriesā (tomshardware gave a hint at that i think, so it is should not be above the X1E printer). It could be possible the printer stays cheap at around 2000ā¬. That would not to bad i think. But the AMS 2 pro, that can feed 2 nozzles could be priced about 200 to 300 ā¬ more than the actual one at 300ā¬ and settle at about 500 to 600ā¬.
That would be a combo price for printer plus AMS at about 2600ā¬. That would not be that bad i think. For me that would be an instand buy than.
Do you think that could be possible that the printer gets that cheap? And not the 3000 to 4000ā¬ we expected?
2 Likes
Finally!
For me this will be an instant buy.
Like every other Bambu Lab printer (twice), excluding only the X1E.
Here are some more Enhanced photos that are better. I can see the dual extruder very well.
I still donāt know what this is
This is what the AMS HT will look like (aka. AMS 2 Pro)
1 Like
Agreed -but should still be possible to use both extruders at the same time for things like bottom surfaces and infill - see this video for the sort of thing I am thinking https://youtu.be/q-BAk5jvPGo?si=UeaQc4BndPyeEaE3
2 Likes
I am looking forward to march 20, that realy could be some new information we do not know the printer will come with.
1 Like
I think the photo might be an extruder assembly that is exploded out?
1 Like