How about enabling XY Hole Compensation and XY Contour Compensation on prints that use the AMS.
I have a couple of suggestions for future updates to BL Studio, they would be very helpful for people like me who don’t design what we want to print. Maybe someone else has suggested this before, but if not, I’ll let you know.
1- When making cuts, connectors are automatically generated according to modifiable parameters, such as: type of connector, number of connectors and their distribution (centered if there is 1, or distributed if there are more).
2- Make automatic cuts by color according to how the model has been painted, with the corresponding connectors generated.
I don’t know if it would be possible to develop and implement it, that will be known by those who are dedicated to programming, especially slicer programming.
I have an idea for camera denoising, hopefully it can be done for livestreaming data, but if not, time lapsing works as well.
Here’s an example:
Standard camera quality with no lighting upgrades on an X1E, vs:
Denoised with the camera data being filtered.
The process to denoise a live video might be too computationally intensive to viably implement, but for timelapses stored to the SD card with image groups, the end result can be much higher quality.
As a bonus, the lower color data in the noise has actually made the file sizes smaller in my testing. It would be cool to see this added to a future firmware release if there’s an easy way to implement!
I’d like to edit that the change is less noticeable when posted on the forum, but definitely in-person when viewing on a standard PC monitor.
I was about to ask if you were trolling with two identical photos and asking us to see a difference…
I assume the conversion down in quality made the changes unperceivable on the forum.
[Edit] If you actually click on the photos and enlarge them, I was actually able to see a difference in the dark backing of the photo.
That would reduce the compressed size of the images by reducing the number of colors used in the photo. And the “cleaned” photo did look… cleaner.
1 Like
what about the ability to connect a camera up to the printer and have it as the cmera
2 Likes
Darn… I wanted to add something else but already voted…
Make it one heck of a lot easier to post in this forum! I just spent $1500 on a printer and I can’t post until I do a whole bunch of stuff to get trust. Buying a printer should earn one the trust needed to post in the general discussions and troubleshooting areas.
1 Like
X and Y dimensional accuracy calibration macros/tools.
1 Like
Really?It’s really a small thing.
I get it. A feature request for the forum to let you post right away if youve purchased a printer. Good idea. Ive seen this frustrate many people.
Mmmmm trolls come in all shapes and purchasing capabilities, and this forum is rife with trolls, I’m okay with earning the ability. There are official Bambu Lab forums outside of this one on Reddit, Facebook, and Discord where you can gain access faster and in some cases get more/faster responses, this forum is more for those wanting to contribute to and be a part of a smaller BBL community imho.
1 Like
I have to ask. Do you think someone would purchase a printer to troll the forum instead of just doing the few things needed to post? Id say have both. someone who purchase a printer gets instant access and also people that havnt purchased, earn access through posting. Not exactly sure how the handull of prerequisites could stop a troll anyway. Its most likely for marketing bots. This thread is for ideas to add, not for shooting down. Thats kinda trollish
Were you asking me or the imaginary person who said what you asked? When did anyone suggest someone would buy a printer to troll? Don’t answer I don’t really have time for this. Peace.
Since you edited your comment I’ll reply to the new portion: the only person trolling now is you, I’d like this forum harder to access for people who want to rabble rouse, looking at you. I’m blocking you now, no one has time for this negativity.
I do get it.
Purchasing a printer does not make one automagically eligible for anything. Well maybe a warranty.
The rules are in place for a reason. Lately they’ve been seen to maybe be a bit more strict.
We’ve all handled it just fine, so will you.
2 Likes
Yes John, I believe he was making a feature request to change that. These will all be requests to change or add something. Imagine if when you joined the forum with the same email you used to purchase the printer, the system knew you werent a bot right away. That would be pretty slick.
I understood the request. I don’t believe just because you purchased something automatically means you’re a great person and won’t troll.
Same reason you need to be approved for some FB groups.
The requirements aren’t a real hurdle. Not like you’re being asked to take a knowledge test. They’re simply trying to slow down those that sign up just to troll. Serious ones will and do get through, but it does stop others.
Now that’s my opinion. Because I disagree doesn’t mean, well anything.
4 Likes
So youre saying the few steps involved will stop trolls. gotcha. Its for bots
No.
I’m not saying that. BL says that with the rules. Why do you want to lay this on me?
I stated my opinion. I stand by my opinion that it’s a small thing.
If you want to argue pick someone else. This isn’t my circus and I have no intention of being a clown in it.
1 Like