The X-Filter is an advanced all-in-one HEPA 13 and activated carbon filter designed for Bambu Lab X1C, X1, and P1S printers. It seamlessly replaces the stock Bambu Lab carbon-only filter, offering superior filtration by removing 99.95% of nano-plastics, harmful VOCs, and odors for a cleaner and safer 3D printing experience.
Find out more on our website. We have the PM2.5 test results and a quick overview video there, too.
I’ll give them a shot. I just ordered a few.
Here is the video by Made with Layers (Thomas Sanladerer) on the X-Filter. https://www.youtube.com/watch?v=wtFwPf087ag
Is there anywhere to buy this in europe? The shipping’s even more than the product from the USA
Reach out to our support and they will be able to provide you with a shipping discount.
Why is it necessary to replace the filter every 2 months?
Super excited for these. Not gonna replace my air purifier, but will definitely be going into my X1 as soon as I get around to ordering a few.
The activated carbon will be less efficient after 2 months. We recommend replacing the X-Filter every 250 print hours or 2 months.
did you get them yet and how well does it work with abs and other smelly/toxic filaments? also does it work well without the bento box or is that still needed?
I’m horrible about procrastination. I did get them and someone else had also asked me about them. I promise before the end of the day I’ll post pictures and also do a test with some ABS and a VOC detector.
Very curious about that meter shown on the product page. Is that available?
This is what I was going to build (one near the printer, and one at my desk)
Update: total cost for parts is around $115 per box when ordering off Amazon.
Whoa! Thanks for that link! Going to take some time to digest that!
I’m am very interested I. What you find. Might you be planning a with and without test?
I was going to do a new (just opened) Bambu filter vs the Voxel filter but I can totally add a 3rd run with no filter. Thanks for the suggestion.
This is now officially awesome!!
Will you be running the chamber fan?
I just went to order four of the Hepa/Carbon filters.
The items are inexpensive.
Shipping to the U.K. is very costly and takes ages. 2 - 4 weeks!
Annoying.
I am. I have it set at 50% for the test. I’m doing the first run now. I’m going to take measurements each time after it’s been printing for an hour. Then let the levels get back down to normal before the next run.
I don’t know if this is available for the U.K. too but in the US shipping was free if you ordered 6 filters.
Nope, good idea though.
I added 20 to the basket and it just increased the shipping costs.
The only reference to free delivery was $65 or more qualifies for free delivery,.
We use the far better £ money system, they hate it as far as I can tell.