Explaining the "Auth System" in laymans terms

[drakko]

PART 4

References

1. ↑ Firmware Update Introducing New Authorization Control System

2. ↑ https://all3dp.com/4/bambu-lab-limits-third-party-printer-control-with-new-security-update/

3. ↑ Firmware Update Introducing New Authorization Control System

4. ↑ https://old.reddit.com/r/BambuLab/comments/1i45iy2/bambu_lab_reserves_the_right_to_brick_your/

5. ↑ https://old.reddit.com/r/BambuLab/comments/1i45iy2/bambu_lab_reserves_the_right_to_brick_your/m7sezlg/

6. ↑ https://old.reddit.com/r/BambuLab/comments/1i45iy2/bambu_lab_reserves_the_right_to_brick_your/m7t8i7r/

7. ↑ https://www.bitdefender.com/en-au/blog/hotforsecurity/someone-is-hacking-3d-printers-to-warn-owners-of-a-security-flaw

8. ↑ https://www.csoonline.com/article/566223/over-3700-exposed-3d-printers-open-to-remote-attackers.html

9. ↑ https://wiki.bambulab.com/en/security-incidents-cloud-traffic

10. ↑ Bambu Connect (beta) | Bambu Lab Wiki

11. ↑ Full Non-Cloud Based Network Option Needed

12. ↑ https://www.classaction.org/hp-printer-lawsuit

13. ↑ https://www.wired.com/story/tesla-remote-disable-used-car-features/

14. ↑ Firmware Update Introducing New Authorization Control System

15. ↑ Bambu Connect (beta) | Bambu Lab Wiki

16. ↑ Bambu Connect (beta) | Bambu Lab Wiki

17. ↑ Jump up to:17.0 17.1 17.2 BIGTREETECH

18. ↑ This new auth system will make me sell my printers - #9 by hho

19. ↑ Firmware Update Introducing New Authorization Control System

20. ↑ Bambu Studio 1.10.2 Public Beta - #12 by Square3D

21. ↑ Full Non-Cloud Based Network Option Needed - #9 by edlboston

22. ↑ Jump up to:22.0 22.1 x.com

23. ↑ Bambu Connect (beta) | Bambu Lab Wiki

24. ↑ FW 1.08.03.00 from Bambu WILL BREAK ORCASLICER for X, P and A series · Issue #8063 · SoftFever/OrcaSlicer · GitHub

25. ↑ This new auth system will make me sell my printers - #9 by hho

26. ↑ FW 1.08.03.00 from Bambu WILL BREAK ORCASLICER for X, P and A series · Issue #8063 · SoftFever/OrcaSlicer · GitHub

27. ↑ Bambu Connect (beta) | Bambu Lab Wiki

28. ↑ Bambu Studio 1.10.2 Public Beta - #12 by Square3D

29. ↑ GitHub - ChazLayyd/Bambu-Lab-Klipper-Conversion: Running Klipper on a Bambu Lab machine by replacing it's internal electronics with readily available open-source hardware.

30. ↑ DhazLayyd’s Discord Community ChazMakes Official

31. ↑ FW 1.08.03.00 from Bambu WILL BREAK ORCASLICER for X, P and A series · Issue #8063 · SoftFever/OrcaSlicer · GitHub

32. ↑ This new auth system will make me sell my printers

33. ↑ This new auth system will make me sell my printers - #4 by drakko

34. ↑ Full Non-Cloud Based Network Option Needed - #9 by edlboston

35. ↑ Bambu Studio 1.10.2 Public Beta - #12 by Square3D

36. ↑ Full Non-Cloud Based Network Option Needed - #5 by NeverDie

37. ↑ Bambu Studio 1.10.2 Public Beta - #4 by hho

38. ↑ https://old.reddit.com/r/BambuLab/comments/1i2psvz/firmware_update_introducing_new_authorization/

39. ↑ Full Non-Cloud Based Network Option Needed - #9 by edlboston

40. ↑ Bambu Studio 1.10.2 Public Beta - #12 by Square3D

41. ↑ Full Non-Cloud Based Network Option Needed - #5 by NeverDie

42. ↑ https://www.classaction.org/hp-printer-lawsuit

43. ↑ https://www.wired.com/story/tesla-remote-disable-used-car-features/

Link to original analysis below:

Bambu Lab Authorization Control System - Consumer Action Taskforce