The woes of owning an X2D

[JamboBambu]

Some examples for warping because of the active cooling and heating:

Getting warping on tall prints on the X2D

Ive been printing with ABS exclusively and the X2D has the internal heater option which activates for ABS prints. I figured this would help my ABS prints but unfortunately. I’ve been running into some issues. It only happens on very tall prints and on the last inch or two of the top of the print. Im wondering if it has something to do with the left recirculating heater fan blowing on parts and creating heat differences so it warps. Im further convinced its the fan due to the fact that i printed …

X2D Manual Aux fan control in cooling mode and disable autocooling for PETG+PLA

When you comment out those lines, create a separate user printer profile (e.g., X2D PETG/PLA) and use that profile only when slicing PETG prints. The default profile should remain unchanged, as it can’t really be modified. What you’re doing is essentially creating a custom user profile tailored for that type of printing. Just make sure to select this profile when slicing PETG, because the slicer will revert to the default profile when you reopen the project.

Warping then using support materials PLA/PETG

Finally was able to print the model without it warping on the support material. Thank you very much for your help. I changed the design a bit too, to get more contact area with the support. All those things together made the difference Print quality also improved, but there is still a small flaw with the print. There is a clearly visible bulge, where the support material stops. Guessing its because the layers don’t get to cool as much, when there isn’t a stop to change nozzle and pur…

If you look you will find many others. Also valid for H2 Series.