Looks like FTP works on the P1 and A1 series now! It does not require LAN mode to use, either :slight_smile: More specifically FTPS (port 990 / implicit FTP over TLS). Note that FTPS is not the same as SFTP! The username is bblp. The password is the access code found on the printer LCD within the…

Agreed. Presumably it’s in the works but I’ll be unhappy if it’s not.

That works for me too. I also found that the ftps lib for python worked for uploads without hanging/crashing the printer. I was wondering what the difference might be. Upload speed isn’t stellar (getting around 150kb/s for a large file) But the unzip perf with the 3mf was pretty poor too - often ab…

FileZilla on MacOS works for me. HTH.

Can you upload files larger than ~250kb without it failing?

Via Filezilla, yes… biggest I’ve done so far was about 3mb.

Read my post for information regarding your issue [image] Error 150: Failed Sending Data To The Peer Bambu Lab P1 Series "Failed uploading print file [Unknown error.status=150, body=Failed sending data to the peer: " ISSUE RESOLVED - PLEASE LOOK AT END OF POST My P1P wa…

Your issue seems unrelated. The FileZilla upload issue seems to have to do with the session ID being reused. WinSCP can be used instead as per this post above and the OP mentions this now as well. I only asked @Nunzy about uploads larger than ~250kb only because it’s interesting that it works on th…

@Nunzy , can you share your FileZilla settings? I have tried many settings using FileZilla 3.64.0 on macOS 13, but I can’t upload anything. I can download timelapse videos without any problem, but every upload fails and the P1P is getting disconnected from network.

Only thing I changed was to upload in ASCII, bit is was still hit or miss as to if it uploaded g-code, as it updates the file on the p1p, but filezilla still whines about being disconnected a couple of times before it works. Have you formatted your sdcard for 4k sectors? as I had issues before I di…

Finally access to my Timelapse Folder. Thank you much very (y)

We can now connect to FTP on the P1 and A1 Series

Bambu Lab P Series

blackdawnz May 5, 2023, 9:09pm 61

Read my post for information regarding your issue