What results do you get from Califlower calibration?

[JPP]

Here is what I got on my X1C printing EleGoo PETG Rapid with a x-obsidian high flow nozzle. I’d be interested to see what sort of results others get and with different filaments.

[lindnjoe]

You might be interested in this thread, lots of info on how to correct for skew on the x1 series.

Skew compensation in the Bambu X1C Firmware

See this post for a method of compensating in Firmware for Skew in the X/Y geometry of the Bambu X1C: https://www.reddit.com/r/BambuLab/comments/1adh0bn/comment/kwp3rh3 See also this post in the Bambu Lab X1 Specific G-Code section.

[JPP]

Thanks, I can live with 4/100th of a degree of skew. Nothing I print requires better accuracy than that (plus I’d want to use something better than my $30 amazon calipers if I was going to start trying to correct for very small errors). The rest is mostly just PETG shrinkage as far as I can tell.